Custom Engraving, Logos and Branding on Brass Home Décor

By Bhavini Khullar | Founder, Byaas | Adjunct Professor, Montclair State University

Short answer: Brass can be branded with laser engraving, etching, stamping or hand engraving. Send a vector logo, keep marks simple, place them on flat areas such as the base, and test on a sample first.

Watch people at an antique market. They pick up a brass candlestick, admire it, and then do the same thing almost every time: they turn it over to look for a mark. A maker's stamp, a set of initials, a date. That small mark is what turns an object into a story someone can trace.

That instinct is only getting stronger. Vintage and antique pieces ranked among the top choices in the 1stDibs survey of 468 interior designers for 2026 (1stDibs). The pieces people collect are the ones someone was proud to sign. A well-placed mark tells your customer this piece was made with care, and it tells their grandchildren the same thing decades from now. Brass is one of the finest materials for it, because it holds fine detail and keeps its look for generations. Here is how to do it well.

Laser engraving

A focused fiber laser removes or marks a thin layer of metal to leave a permanent mark. It is precise, handles fine detail and suits small and medium runs, which makes it a good choice for logos, names, dates and short text. Depth and contrast depend on the metal, the finish and the laser settings.

Etching

A chemical or electrochemical process eats a design into the surface through a mask. It gives a soft, subtle result and works well for larger decorative patterns where the mark should feel part of the surface.

Stamping and embossing

A hardened steel die is pressed into the metal to leave a recessed or raised mark. It is very consistent and economical at volume, but the die has to be made first. It suits makers' marks and simple logos, very much in the tradition of the stamps collectors look for.

Hand engraving

Cut with gravers by a skilled engraver. It carries character no machine can match and suits premium or limited pieces, monograms and dedications. It costs more and takes longer.

Printed and attached branding

Not every mark needs to be in the metal. Hang tags, printed sleeves, care cards and boxes carry your brand without touching the surface. Many brands pair a discreet engraved mark on the base with considered packaging.

Preparing your artwork

Send your logo as a vector file: SVG, AI or PDF. Vectors scale cleanly. Avoid low-resolution images, simplify very fine lines that can fill in or fade on metal, and tell us the size and position you want.

Placement and finish

Place marks where they can be found but do not intrude: the base, the back, the inside of a lid, a flat area. Flat surfaces engrave more cleanly than curves. Finish matters too. Engraving reads differently on polished brass than on brushed, and the order of finishing and engraving changes the result, so we test on samples. You can see engraving in our own range on the Anaar engraved incense and storage box.

Branding different products

On a candle holder, a small mark on the base keeps the form clean. On a tray, the underside or a corner works well. On a vase, the base again. On a box, the lid can carry a larger logo. Think about where a customer will naturally see and feel it.

Packaging as part of the brand

A printed sleeve, a branded box, a care card and tissue wrap make unboxing feel considered. Brass is heavy and its surface scratches, so packaging must protect as well as present. Plan the two together and give your manufacturer final box dimensions early.

Common mistakes

• Fine lines or tiny text that become illegible once engraved

• Low-resolution artwork that blurs

• Marks placed on curved or textured areas, where they distort

• Branding so large it makes the product feel like merchandise

Keep marks simple, scaled to the piece and tested on a sample first.

Cost and minimums

Cost depends on method, artwork complexity and quantity. Laser engraving suits small and medium runs; stamping becomes more economical at volume. Byaas has a $250 minimum order. See minimum order quantities for planning.

Protecting your brand

If you are building a branded line, register your trademark and make sure your manufacturing agreement covers who owns the design and artwork, and whether the maker may sell the same design to others. Agree it in writing before development starts. See ten questions to ask before you commit.

How to get started

Send your artwork and product brief through the contact page. For the bigger picture, read custom brass manufacturing with Byaas and launching a branded home goods line.

Frequently Asked Questions

Can you engrave my logo on brass products?

Yes. We recommend a method based on your design, quantity and finish.

What file format should I send?

A vector file such as SVG, AI or PDF. High-resolution PNG can work for simple marks.

Does engraving damage the finish?

Not when done properly. We advise whether to engrave before or after finishing and test on samples.

What is the difference between engraving and etching?

Engraving removes metal mechanically or with a laser. Etching uses a chemical or electrochemical process. The depth and look differ.

Can customers add personal engraving, like initials or a date?

We don't currently offer personalization such as initials or dates on individual retail orders. Logo and branding engraving is available on custom and trade projects.

Piece mentioned in this article

About the author

Bhavini Khullar is the founder and creative director of Byaas and an adjunct professor of Advertising Media Strategies at Montclair State University. She grew up in her family's metal workshop and has spent more than a decade studying audiences and how people decide what to buy. Byaas is where those two worlds meet.

Made mindfully, lasts forever

Every Byaas piece is shaped by hand to be lived with, restyled and handed down. Explore the collection.

For retailers, designers and brands: we supply boutiques through our trade program and make custom pieces for brands. Open a trade account or start a custom project.